High pressure hoses

Features and advantages

High-pressure hoses enable you to assemble high-pressure systems with flexible connections up to 3,200 bar ( 46,000 PSI ). High-pressure hoses are ready for the assembly, supplied complete with high-pressure connectors, e.g. with gland nuts  and collars on both ends. These high-pressure connectors may be installed directly into  all HP components of the corresponding tube connection size. In the multilayer pressure hoses, the 4–8 spiral wound layers of plated high-strength steel around the flexible hose core serve as pressure support. To protect these spiral wound  layers against mechanical damage, they are covered by another cover of non-abrasive material. The safety sleeves at both hose ends ensure a solid connection between high-pressure hose and connectors. Materials: Hose core Polyoxymethylene (POM) - Connecting nipples Stainless steel Operating temperature: – 10°C to + 60°C. The maximum operating pressure is depending on the process fluid. The following safety factor compared to the burst pressure are proposed:
SF=2.5: For water.
SF=4: For other liquids and for gases. Important: The customer is responsible for the compliance with all local safety regulations! The indicated minimum bending radius must be observed. During the installation and in operation high-pressure hoses  should not be kinked or stressed mechanically.

Options

Models without protection cover (add “-O” to the part no.). Hose safety stockings for length L 1.5 m or more (add “-S” to the part no.)